诚信压缩机批发 一件也是批发价
进入中文版 ENGLISH
产品分类
新闻动态

• 压缩机排气压力较高

• 压缩机的压力开关设定工作压力过

• 压缩机电机启动电流情况分析

• 压缩机为什么液击?

• 压缩机排气过热的原因

联系我们

联系人: 胡经理
电话: 18881888738
手机: 18881888738
地址: 杭州城北物流园B-1806
QQ: 1113928888,1113298888

新闻动态

谷轮涡旋压缩机缺油故障的预防以及解决方法

来源:胡经理 发布时间:2019/3/22 15:45:15
 我们知道,制冷压缩机缺油运行,对其本身的造成的损伤是无法逆转的。这条规则,对于谷轮涡旋压缩机同样适用。本文中我们将以谷轮ZB38KQ-TFD-558为例来讲解。首先,涡旋压缩机内部缺油长时间会导致机构部和各摩擦副过热,导致轴承烧结、抱轴;即使短时间缺油也会导致机构部和各摩擦副异常磨损,导致振动、噪音大。
We know that the compressor compressor running without oil, the damage to its own can not be reversed. This rule is also applicable to the scroll compressor. In this paper, we will take Valley wheel ZB38KQ-TFD-558 as an example to explain. First of all, the scroll compressor internal oil long time will lead to overheating mechanism and the side friction, sintering, lead to bearing axle; even for a short time lack of oil can also cause the friction mechanism and lead to abnormal wear, vibration, noise.
以谷轮ZB38KQ-TFD-558为例,循环量在ARI工况下约为330kg/h,压缩机在排出冷媒时,也会排出微量的冷冻机油。即使只有0.5%的上油率,如果油不能通过系统循环回到机器中,则在50分钟就可以将压缩机内的油全部带出,大约在2~5小时内压缩机将会烧坏。
Take the wheel ZB38KQ-TFD-558 as an example, the circulation volume is about 330kg/h under the ARI condition, and the compressor will discharge a little refrigerator oil when the refrigerant is discharged. Even if only 0.5% of the oil rate, if the oil can not return to the machine through the system cycle, then in 50 minutes you can bring all the oil out of the compressor, in about 2~5 hours, the compressor will burn out.
预防方法: 1、确保排出压缩机的冷冻机油回到压机内;2、减少压机的上油率。(压机频繁启动不利于回油。)
Preventive measures: 1. Ensure that the refrigerator oil of the compressor is returned to the press; 2, reduce the oil rate of the compressor. (press starts frequently, which is bad for oil return)

在线 服务

点击这里给我发消息 点击这里给我发消息